How To Use A Screwpull Wine Opener

Do you have a few wines in your cellar but have no idea how to open them? It’s a bit intimidating opening a classic wine bottle because of the tight-sealed cork but rest assured, there are ways to open them. There are also plenty of wine openers such as screwpull, winged, or rabbit wine openers that will help you unleash that stuck cork. To help you open a wine bottle, let me share with you how to use a screwpull wine opener. This article will also give you tips to open a wine bottle using a rabbit and a waiter’s friend wine opener.
What Is Screwpull Wine Opener
The easiest tool to use to remove a wine cork is using the screwpull wine opener. It comes with a spiraled rod, often referred to as the ‘worm,’ and handle on top to grip on to. To pop the cork out, screw the worm into the cork and then pull on the handle.
They are the perfect accessory to keep around your wine cellar or your mini bar at home. One major downside of a corkscrew is that pulling the cork may take some arm strength and force.
If they can pop out the cork at all, some individuals can struggle to remove the cork and find it takes a little longer to open the bottle. Traditional corkscrews or screw-pull wine openers are not nearly as common as the other options. They are much easier to use than other styles of wine openers on the market.
How To Use A Screwpull Wine Opener
If you’re looking for smarts on how to use a screwpull wine opener, I’ve got you covered. These wine openers are well-built and the perfect alternative to open a wine bottle.
Traditional or Screwpull Wine Opener
How to use a screwpull wine opener should not be that complicated. There is a long spiral in these corkscrews, two buttons, and a ring that fits atop the bottle.
To open wine using a screwpull corkscrew:
- Place the circular opening where the bottom of the worm is above the cork after cutting the foil. Position the levers below the cork.
- Turn the handle until it comes up to the levers. Press down, and then extract the cork by twisting away from the cork from the spiral.
Rabbit Wine Opener
The rabbit type wine opener is be made up of a clamp that goes around the bottle and a lever that sets the worm or spiral. Three basic steps are required to utilize a rabbit-style wine opener:
- Place the lever on top of the bottle's neck, so the worm is up, and clamp the handles.
- Shift the lever upwards, the worm penetrates the cork, and then the cork is pulled down.
- To detach the cork from the worm, lock the cork and move the lever up and down again.
It’s so easy! The worm or spiral rod is covered with a non-stick material. When it begins to be difficult to use, a decent wine opener with a spiral is a good alternative. Most come with or have a built-in clamp with a foil cutter.
Rabbit wine openers are a bit more expensive, but you get what you pay for, and you get smooth, easy extraction every time.
Waiter’s Friend Wine Opener
There are two pieces to these openers, a spiral and a boot lever. For cutting the foil, most have a user-friendly blade, either a serrated or sharp flat edge. It never slices cleanly using the worm’s tip, and it dulls the tip. To use a waiter’s friend’s wine opener style, here are the three steps.
- Turn the spiral six times into the cork. You should see one curl on top of the wine opener.
- To begin extraction, engage the top lever up to the bottom of the cork. If the bottom is still on after using the tool, you can use a twisting or rocking motion to loosen the cork.
- Twist the cork off and enjoy it.
Some of the waiter’s wine openers have a long spiral to help with extra-long corks.
Things To Consider About Traditional or ScrewPull Wine Opener
In terms of efficiency, size is not much of a factor compared to portability and storage. Wine openers are usually wide as a typical can opener, although some are lightweight, such as the waiter’s corkscrew.
You need to make sure that the screw is at least 1.75 inches long. The cork may leave residue in your wine if you use small screws to rip it up.
You don’t want your bottle of wine to be shaken; unlike James Bond’s martini, you may want to learn how to use a screwpull wine opener. If there’s cork remainder in the bottle, you need to spill it out. This is why you want to choose a wine opener that extracts the cork but does not shake the bottle.
What Is Worm Look Like
The worm is meant to look like a coiled spiraled snake or rod. It shouldn’t be a drain auger where a normal screw appears, making it harder to open a wine bottle and leaves a residue.
Make sure the worm has the right thickness. It’s not too thin because it might crack when you screw it in or too thick. After all, you may tear the cork. Aside from knowing how to use a screwpull wine opener, the worm plays a big role in removing the cork. Find out more about tea kettles.
Conclusion
There are plenty of ways to remove corks out of the bottle if you’re a wine drinker. Many are simple to use and affordable. You may want to keep more than one corkscrew in your home if you drink wine on occasions. That’s why it’s ideal for learning how to use a screwpull wine opener to relieve the burden of pulling out the stubborn cork.